Bostik MS 2750 mounting adhesive inside / outside 430g

SKU: BS-H355
Category: Adhesives
Manufacturers:

This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.

Bostik MS 27501-K-Hybrid Adhesive and Sealant 430g Cartridge Adhesive

10,00 €

23,26 € per 1 kg

incl. 19% VAT , plus (Standard DHL)

Old price: 12,00 €

Available immediately
Delivery time: 1 - 2 Workdays (Other countries)

This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.

BOSTIK MS 2750 1 standard cartridge (430g) 1-component hybrid adhesive and sealant Application: BOSTIK 2750 MS is suitable for the elastic bonding of various materials indoors and outdoors, in particular for wood and metal materials, including panels, door frames, skirting boards and Styropor®. On substrates such as concrete, masonry, plaster, wood, metal or with the materials mentioned themselves. Also suitable for gluing cork mosaics in outdoor areas. One-component hybrid adhesive for the elastic bonding of different materials in interior and exterior areas. Particularly suitable for bonding films in the facade area (e.g. butyl and EPDM films), bonding panels and bonding in wood, metal and container construction. Declaration of no objection for food transporting vehicles and food processing companies ((EG) No. 1935/2004 and LFGB §§ 30 und 31). Solder semisolvent free, odourless, elastic, broad adhesion spectrum, fast curing. Technical data: Basis: silane-terminated polymers, neutral cross-linking Hardening system: by air humidity Standing capacity: stable; < 2=""" mm=""" (din=""" 52454-st-u=""" 26-23)=""> Spray rate: > 100 g/min (DIN 52456 - 6 mm) Specific weight: approx. 1.5 g/cm³ (DIN 52451-PY) Skin formation time (+ 23 °C/50% r. h.): approx. 30 min. Curing time (+ 23 °C/50% r. h.): approx. 3 mm/24 hrs. Change in volume: < -3%=""" (din=""" 52451-py)=""> Tensile strength (2 mm film): approx. 2.5 N /mm2 Elongation at break (2 mm film): approx. 500 % SHORE A hardness: approx. 55 (DIN 53505, 4 weeks 23 °C/50% r. h.) Max. Motion absorption: 10 %, related to the initial width of the joint Temperature resistance: approx. -40 °C to + 80 °C Processing temperature: + 5 °C to + 40 °C (component temperature) Shelf life: 9 months in unopened original containers, store in a cool, dry place between + 5 °C and + 25 °C.