This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.
Scope of application:
This product is particularly suitable for gluing cork boards and adhesive cork tiles. The material must be coated with adhesive on both sides. After drying (the adhesive becomes transparent) the surfaces can be pressed against each other and the material develops its adhesive effect on contact. Please call us in case of doubt and get free advice! For the laying of cork boards according to DIN EN 12104 with untreated or treated surface on absorbent and non-absorbent substrates as well as on fixed surfaces in the floor area. Also suitable for cork wall coverings and carpet laying on steps. WAKOL D 3540 conforms to DIN EN 14259. instructions for laying adhesive cork can be found on our YouTube channel.
How it's done:
for cork coverings on both sides with WAKOL primer roller or velour roller, for carpets on both sides with brush or fine toothing Consumption: for cork at least 250 g/m², otherwise approx. 150-650 g/m²
Soaking time:
approx. 30-45 minutes on absorbent subfloor, approx. 60-90 minutes on non-absorbent subfloor and on the back of the coveringOpen time: approx. 120-180 minutes, with precoating approx. 60-90 minutes
Storage note:
not below +5 °C, sensitive to frostRaw material base:latex/acrylate dispersionEMICODE:EC1 PLUSGISCODE:D1
