This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.
You buy here:
1 bag cement filler / 25 kg
This high-quality putty is a universal, low-tension putty for very high demands during parquet and floor covering work. Mineral substrates up to 20 mm as well as mastic asphalt (layer thickness limit 5 mm) can be levelled with this putty in one operation. In addition, the putty is pumpable, scraperable and can be stretched with quartz sand up to 30 %.
The list price for a similar putty such as Ardex K15, PCI, Bostik, Wakol, Mapai etc. is approx. 35 - 40?/bag
Suitability: object area with very high stress
very good self-levelling properties
up to 20 mm can be filled with filler
tying with low tension
pumpable
very high compressive strength and final strength
squeegeable
stretchable with 30 % quartz sand
very low emission
casein-free
complies with MED 96/98/EC on marine equipment, flame retardant according to IMO FTPC Part 5
Areas of application:
Universal, low-cutting putty knife for very high demands during parquet and floor covering work, which is covered with a floor covering according to DIN 18365 / 18356
should be. Mineral substrates up to 20 mm as well as Gusasphalt (layer thickness limit 5 mm) can be levelled in one operation with this putty knife
will be. Furthermore also for the leveling large areas with a furniture mixer and
Pumpagregat suitable. RETOL BASE Concrete Plus is basically pumpable, squeegeeable
and stretchable with RETOL BASE quartz sand up to 30 %.
This filling compound can also be used as a so-called coating in concrete optics, such as Pandomo, Semko and other coatings as a finished floor covering.
Depending on the strain, the surface should then be sealed or oiled.
Also the colouring and a combination with cork mosaic is possible.
Please call us shortly before ordering.
Substrates:
The subsoil and the climatic conditions in the room must meet the requirements of DIN
18356 / 18365. Underbody must be well absorbent, permanently dry, even, firm and
be free of impurities, cracks and adhesive substances. Tren-, sinter layers, old water-soluble adhesive soaps, old, loose or composite weak ones
Filler layers etc. must be removed by suitable mechanical means. Old woman
Use gusts, e.g. ceramic tiles, must be thoroughly cleaned and sanded. Not
lowered areas must be sealed against rising damp by the customer.
When floor coverings are laid subsequently, cement screeds must have a residual moisture content of
of max. 2 CM-% (heated screeds max. 1.8 CM-%), calcium sulphate-bonded screeds of
max. 0.5 CM-% (heating screeds max. 0.3 CM-%). Absorbent substrates such as
B. Cement screeds, quick cement screeds, calcium sulphate-bound substrates, dry screeds pre-treat with suitable pre-coats
When laying on underfloor heating, the existing measuring steles must be installed in accordance with DIN
4725/4 can be tested for moisture
Processing instructions:
Processing always between 5?25 °C room air temperature. RETOL BASE Concrete Plus with
clean, clear mixing water with a mechanical stirrer at approx. 60
Mix the mixture at the rpm to a smooth, non-clumping mixture. After 2?3 minutes
Stir the maturing time through the Mase again, then finally in a single operation
Apply and distribute layer thickness up to max. 20 mm. For a chair suitable for use in a chair should be
at least 1.5?2 mm should be levelled, on non-absorbent surfaces 2?3 mm,
under parquet 3 mm. In the case of gusasphalt, 5 mm must not be exceeded. For
Layer thickness over 10 mm can RETOL BASE Concrete Plus with 30 % RETOL BASE
Quartz sand can be stretched. However, this makes it suitable for use under parquet flooring
impossible. Surface after filling with the RETOL TOOLS venting roller or
vent and shine with a clean, large screed broom / swivel bar. With
Fillings in connection with floor constructions 3 days before processing
Switch off underfloor heating. Soil temperature max. 18 °C. Heating after 24 at the earliest
Hours step by step again.
#supremeWidgetFooter369647 {padding: 5px 0px 0px 0px 0px; font-family: Arial, Helvetica, sans-serif;} #supremeWidgetFooter369647 p {float: left; font-size: 8px; color: #FFF; margin: 0px; padding: 5px 0px 0px 0px;} #supremeWidgetFooter369647 a,#supremeWidgetFooter369647 a:Visited {font-size: 12px !important; text-decoration: none;} #supremeWidgetFooter369647 a:hover {text-decoration: underline;} #supremeWidgetFooter369647 img {float: right;}
#supremeWidgetFooter369648 {padding: 5px 0px 0px 0px 0px; font-family: Arial, Helvetica, sans-serif;} #supremeWidgetFooter369648 p {float: left; font-size: 8px; color: #FFF; margin: 0px; padding: 5px 0px 0px 0px;} #supremeWidgetFooter369648 a,#supremeWidgetFooter369648 a:visited {font-size: 12px !important; text-decoration: none;} #supremeWidgetFooter369648 a:hover {text-decoration: underline;} #supremeWidgetFooter369648 img {float: right;}
supreme
supremewidgets
#supremeWidgetFooter369647 {padding: 0px 0px 0px 0px 0px; font-family: Arial, Helvetica, sans-serif;} #supremeWidgetFooter369647 p {float: left; font-size: 8px; color: #FFF; margin: 0px; padding: 5px 0px 0px 0px;} #supremeWidgetFooter369647 a,#supremeWidgetFooter369647 a:Visited {font-size: 12px !important; text-decoration: none;} #supremeWidgetFooter369647 a:hover {text-decoration: underline;} #supremeWidgetFooter369647 img {float: right;}
supremeauctiononlinesoftware.widgets.FeedbackWidgetBasicFree.swf
