Cork board 100 x 50 x 2 cm (20 mm thickness) | rustic + sanded

Cork board 100 x 50 x 2 cm (20 mm thickness) | rustic + sanded

SKU: B-KP-100x50x30-r
GTIN: 0721947715559
Category: Insulation boards
Manufacturers:

This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.

Cork board dimensions 100 x 50cm = 0,50qm thickness 20mm coarse grain approx. 2 - 14mm sanded on both sides approx. 2 kg/board

14,90 €

29,80 € per 1 m²

incl. 19% VAT , plus (Standard DHL)

Old price: 18,00 €

Manufacturers recommended retail price: 26,00 €

(Save 42.69%, i.e. 11,10 €)

Currently out of stock

This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.

Cork board 100 x 50cm = 0,50 m² (thickness 20 mm) RUSTIKAL Coarse grain approx. 2 - 14mm ground on both sides Weight approx. 2 kg/panel Application Due to their special stability, these cork boards are suitable for various applications Cork wall covering Pinboard Damp mmplate and many more... The panels can also be used in particular for impact sound insulation - room sound insulation - insulation against cold and heat - improvement of the room climate - avoidance of mould formation - and radiation protection (earth radiation). Properties: The cork plate is sanded on both sides, whereby one side can have some dark spots ( see pictures ) It is a pressed cork with capacities of approx. 2 - 14 mm. Due to the coarse grain size less binder is needed, but there can also be small imperfections ( see pictures ). This does not entitle to advertising. The material has a higher pressure load than normal roll cork and is therefore also used in some cases as an inexpensive floor covering. There are different instructions for the processing depending on the intended use and load. In case of inquiries, please indicate the intended purpose in general. Information on the substrate is also required to recommend the appropriate adhesive and other accessories. Various varnishes, oils and paints are suitable for surface treatment. Attention: These cork boards can vary more strongly in size depending on the humidity of the air. The shocks can be partly more visible ( see pictures ) The material can be cut however very simply with a carpet knife