This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.
Which teeth do I use for which adhesive?
This distinguishes the different types of teeth:
The distance between the teeth of the spade is decisive. The larger the gaps are, the more adhesive remains on the surface after you have applied the putty once. How much adhesive must remain on the substrate depends on the covering you want to apply. If the covering has a rather smooth back, it usually requires less glue than covering with a rather coarse back. Of course, it also depends on the surface on which you want to apply the covering and the adhesive used.
In the case of adhesives, the special weight must also be taken into account and this changes the total consumption and thus the price in some cases considerably.
Therefore, we generally offer to be advised by us in advance. Depending on the existing conditions, we can then recommend a suitable adhesive with the appropriate processing, which can often save a lot of time and money.
Topping
Serration
PVC
A1, A2
Design
A1, A2
Linoleum
A2,B1
Textile with fine back
A1
Textile with structured back
A2
Textile with coarse back
B1
Needle fleece with fine back
B1
Needle fleece with coarse back
B2
Parquet
B11
Mosaic parquet
B3
Planks
B11
Self-levelling cement levelling compound
R2
Rubber
A2
Linoleum
A2
Linoleum with Korkment
B1
CV Bells
A1, A2
Hotline Application Technology: 0171 685 1405
Attention, if these glue spatulas are ordered separately, the costs for packing and shipping will be added to the shipping costs. If the material is not in the same warehouse, we unfortunately always have to charge extra shipping costs. We ask for your understanding that the costs will be fairly distributed also because of our expert advice. A general free shipping, as is often offered in ebay and Amazon, can only be done at the expense of unsocial wages and bad working conditions. If the shipping prices are not shown in our shop please send us an email with a short info.
You are also welcome to send us orders or price inquiries by mail. Please give details of the intended use, quantity and existing conditions, and it would also be very important to know who is processing the material. ( craftsmen or do-it-yourselfers ) So we can advise you better and help you to the best result.
