Contact adhesive cork Korkkleber for adhesive cork cork glue Korkkontaktkleber 0,8
-
-
-
-
-
Manufacturer number: 354010
-
IMPORTANT NOTE!
Dear Customer. Please grab like the phone and can be free and non-binding advice from our professionals. So make sure that you buy the right product for the right application at the right price and possibly save yourself the hassle of sending the goods back etc ..
Phone: +49 7665 932 55 05
e-mail: Please use eBay messaging system
Thank you!
Description
Base price: 16,25 ? / KG
Application:
This product is particularly suitable for bonding of cork and adhesive cork tiles. The material must be coated on both sides with the adhesive. After dry (the adhesive becomes transparent) areas can the material be pressed successively developed on contact its adhesive effect. Consumption per m² depending on the absorbency of the substrate approx 100 g / m² per side.
The 0,8 0lbs package is sufficient for about 3 - 4 square meters of adhesive cork
For laying slabs in accordance with DIN EN 12104 with untreated or treated surface on absorbent and non-absorbent surfaces and on bonded floor finishes in the bottom area. Also suitable for Korkwandbeläge and carpet laying on stairs. WAKOL D 3540 corresponds to DIN EN 14259 .
Instructions for laying adhesive cork can be found on our Youtube channel.
Application method:
in cork flooring on both sides with WAKOL Primer Roller or velor roller, with carpet on both sides with a brush or fine teeth
Consumption:
in cork at least 250 g / m², otherwise ca. 150-650 g / m²
Open time:
about 30-45 minutes on absorbent, about 60-90 minutes on non-absorbent surfaces and on the floor backing
Open time:
approximately 120-180 minutes, at pre approximately 60-90 minutes
Storage Information:
not below +5 ° C; sensitive to frost
Raw materials:
Latex / acrylate dispersion
Emicode:
EC1 PLUS
Giscode:
D1
