Bostik Bostiks Best special floor covering adhesive 850g adhesive for carpet PVC etc.

This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.

Application:This synthetic resin dispersion adhesive is suitable for PVC flooring in sheets and tiles, CV flooring, polyolefin flooring (in agreement with the manufacturer), rubber flooring up to 4 mm thick with smooth, sanded back and smooth usable surface, linoleum and carpet flooring with different back finishes. Technical data: Airing times after adhesive application: with wet adhesive 10min -15min / with adhesive application 45min - 60min Insertion time / Open time: approx. 60min Recommended spatula teeth and consumption: Filling with tooth spatula of tooth form A2 - approx. 280g/m² as well as filling with tooth spatula of tooth form B1 - approx. 300g/m² (the more structured the adhesive surfaces are, the greater the number of spatula must be). resilient: from 24 hours suitability for chair castors: yessuitability for underfloor heating: jalö semist-free and very low-emission processing: The adhesive is applied evenly to the substrate with a serrated spatula. Depending on the floor covering, a ventilation time may have to be set in advance. Place the floor covering in the adhesive bed and rub thoroughly. After 30 - 40 minutes rub the floor covering again. Thermal sealing of the joints should be carried out after 24 hours at the earliest. Special note for the bonding of rubber sheets: For rubber surfaces with a thickness of 3 mm or more, the B1 trowel notch should be used. Adhesive bonding is carried out on non-absorbent substrates in combination with homogeneous PVC surfaces. It is therefore essential that the adhesive is completely ventilated before the floor covering is laid. Airing time: 45 - 60 minutes, depending on temperature and humidity (finger test). Insertion time: Up to max. 60 minutes. goods can be inserted into the adhesive bed as precisely as possible, as corrections are difficult to make.