This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.
Wakol D 3040 Precoat concentrate 1L
Scope of application:
Dispersion primer concentrate for priming cement, calcium sulphate, mastic asphalt, magnesia screeds (with only mineral aggregates), concrete, tiles, terrazzo, water-resistant adhesive residues, wooden planks and gypsum fibre boards before the subsequent filling in interior areas.
How it's done:
WAKOL precoat roller, velour or foam roller
Consumption:
approx. 50 g/m² concentrate
Dry season:
on CT, concrete after optical drying; on AS, tiles, terrazzo, water-resistant adhesive residues for at least 60 minutes; on CA, magnesia screeds, wooden planks, gypsum fibre boards 2-4 hours
Storage note:
not below + 5 °C, sensitive to frost
Raw material basis:
Acrylate dispersion
We recommend this high-quality WAKOL primer concentrate to improve adhesion when gluing PVC planks and tiles. This primer should always be applied before gluing the floor covering, simply with a roller. Thus, the primer offers a very good and long-lasting adhesive strength.
1.0 litre is sufficient for approx. 20 m², mixing ratio 1 part WAKOL D 3040 and 2 parts water. Drying time on concrete and cement screeds after optical drying. Drying time on mastic asphalt, tiles, terazzo and water-resistant adhesive residues at least 60 minutes. Drying time on calcium sulphate screeds, magnesia screeds, wooden planks and gypsum fibre boards 2 - 4 hours. Application: Dispersion primer concentrate for priming: Cement, calcium sulphate, cast iron asphalt screeds, concrete substrates, magnesia screeds with only mineral aggregates, basic cleaned tiles, terrazzo, wooden planks, gypsum fibre boards, water resistant adhesive residues
The General Environmental Product Declaration (EPD): EnvironmentalProduct Declaration) of the Institute for Building and Environment e.V. (IBU) with the declaration number EPD-FEI-20160086-IBG1-EN