This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.
20 kg Flex tile adhesive, white
Extremely flexible lightweight adhesive furniture
highly flexible, one-component and very low-emission thin-bed furniture with strong initial adhesion and almost unlimited application possibilities.
The white thin bed furniture is tested according to DIN EN 12004 - C2 FTE and exceeds the requirements of the guideline "Flex furniture" with a minimum deformability of > 5 mm; June 2001 according to DIN EN 12002-S2.
The use of lightweight filler technology results in higher area performance of up to 20% and very light processing properties.
The fast-setting powder adhesive is particularly recommended for bonding ceramic wall and floor tiles, porcelain stoneware, glass and porcelain mosaics, marble and transparent, calibrated natural stones that are sensitive to distortion, as well as hard foam tiles.
Also particularly suitable for laying on critical surfaces such as exposed concrete, cast ashalt- and calcium sulphate-bonded screeds, old ceramic coverings as well as gypsum and gypsum building boards.
On substrates where considerable changes in length are to be expected due to large temperature differences such as rain, sun, frost and snow, e.g. heated screeds, floor constructions with underfloor heating, façade surfaces as well as balconies and terraces, these can be optimally applied.
recommended for cork mosaic (consumption here approx. 0.80 - 1kg /m²)
Industrial cork boards also outdoor
for ceramic tiles and slabs, porcelain stoneware and glass mosaic
also for marble and natural stone
high surface area performance
on wall and floor surfaces
high thermal load capacity, suitable for underfloor heating
for indoors, outdoors and under water