This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.
1 kg Flex Tile Adhesive Special, white
Note: The adhesive is filled from a larger container of 1kg each!
Extremely flexible lightweight adhesive furniture
extremely highly flexible, one-component and very low-emission thin-bed mortar with strong initial adhesion and almost unlimited application possibilities.
The white thin bed furniture is tested according to DIN EN 12004 - C2 FTE and exceeds the requirements of the guideline "Flex furniture" with a minimum deformability of > 5 mm; June 2001 according to DIN EN 12002-S2.
The use of lightweight filler technology results in higher area performance of up to 20% and very light processing properties.
The fast-setting powder adhesive is particularly recommended for bonding ceramic wall and floor tiles, porcelain stoneware, glass and porcelain mosaics, marble and transparent, calibrated natural stones that are sensitive to distortion, as well as hard foam tiles.
Also particularly suitable for laying on critical surfaces such as exposed concrete, cast ashalt- and calcium sulphate-bonded screeds, old ceramic coverings as well as gypsum and gypsum building boards.
On substrates where considerable changes in length are to be expected due to large temperature differences such as rain, sun, frost and snow, e.g. heated screeds, floor constructions with underfloor heating, façade surfaces as well as balconies and terraces, these can be optimally applied.
recommended for cork mosaic (consumption here approx. 1-1.2kg /m²) - for ceramic tiles and slabs, fine stoneware and glass mosaic -also for marble and natural stone -high surface performance -extremely deformable -for wall and floor surfaces -high thermal resistance -suitable for floor heating -accelerated setting -smooth, easy to work with -waterproof and frost-proof -for indoors, outdoors and under water