Bostik Ardacolor Flex joint tiles joint mortar (5 and 25 kg)
This text has been translated automatically and may contain errors. It does not constitute a legally binding offer. Only the German texts apply.Bostik Ardacolor Flex joint furniture 5 and 25 kg medium grey High-performance joint for indoor and outdoor use - can also be used in wet areas and under water. Application For the grouting of ceramic wall and floor coverings such as porcelain stoneware, stoneware and stoneware tiles, stoneware straps, floor clinker tiles, concrete slabs, glass blocks and natural stone that is not susceptible to discoloration. Also suitable for grouting cork mosaics on balconies and terraces, in swimming pools and pool surrounds, in sanitary facilities, wet rooms, industrial areas with heavy wet loads, in traffic structures such as underpasses and railway stations, deformable lower floors such as heated screeds, on dry screeds, prefabricated concrete parts, wood chip boards, on facades and in areas with severe temperature fluctuations such as cold stores, exhibition rooms, etc. for joint widths from 3-20 mm on wall and floor surfaces high thermal load capacity suitable for underfloor heating accelerated setting supple, easy to work with washable after a short time highly water-repellent and frost-proof high flank adhesion also for porcelain stoneware walkable after 2 hours for indoors, outdoors and under water recommended for cork mosaic (consumption here approx. 2.5kg /m²) Low chromate according to EU regulation 1907/2006 (REACH). Flex joint fulfils the requirement CG 2 WA according to EN 13888 Features & Benefits Smooth and easy to use, setting without cracks, waterproof and frost-proof, high flank adhesion even with porcelain stoneware. colour: medium grey Consumption: approx. 0.4 - 3.5 kg/qm, depending on tile size and joint width - please ask our application engineers if in doubt. Consultation We will be happy to advise you and recommend suitable accessories. For this purpose we should know more about the intended use, area of application, existing structural situation on site, etc. The more details we know, the better we can advise you. You can also let us know your price idea, then we can put together the right material for your purposes.